Deep, punchy bass
NdFe strong magnetic dynamic driver
Ultra-low latency mode
Ultra-long battery life
Switch effortlessly between devices
Soft ear pad & Stretchable headband
Noise canceling for HD calling
Building your own headsets
Lightweight Design Stylish and Colorful
The ergonomic design makes it comfortable enough for all-day use.
Stylish appearance that’s eye-catching and suits every personality.
In BASS mode, QCY-H2 enhances all your low-end frequencies for exceptional bass which is deep and punchy, revivifying dance music.
40mm Driver for Big Sound Stage
40Mm NdFe strong dynamic driver offers wide sound stage.
With professional tuning, this headset delivers rich, delicate sound in balanced tri-frequency.
3D surround stereo provides a wonderfully rich, well-rounded listening experience.
60-Hour Battery Life,One Week Power
Thanks to up to 60 hours of battery life, QCY H2 delivers one week playback after one top-up, if you listen music 8 hours per day.
1.5h Charging time=60h Music time=300h Standby time
* All the above data are measured by Hele Electronic Lab at specific volume yet practical data may vary under different situation.
New Wireless 5.3 Brings
10m Stable Connection
New Wireless V5.3 chips bring high quality sound and stable and high-speed transmission over a distance of 10meters for clear and low latency calls and audio-to-video synchronization,without music or video stutter.
0.078s Low Latency
for Gaming Instant Response
for Flawless Gaming
Turn on the low latency mode,
latency is as low as 0.078 seconds, enjoy a seamless no-lag gaming experience.
* Triple press MFB to activate Low-Latency Mode.
(We recommend you to choose SBC in developer options, if you use Android phone.)
Dual Device Connection
These headphones can be paired with two devices at the same time.
So when a call comes in, your headphones know which device is ringing and connects to the right one automatically.
You’ll also be able to quickly switch your headphones to either of the two devices at the press of a button.
All Day Comfort with Soft Ear Pads
& Stretchable Headband
The newly developed lighweight material
fits snugly around your head, which makes QCY-H2 a pleasure to wear with less pressure on ears.
Super Soft Ear Pads
-Skin-friendly touch, reducing pressure on the head and ears.
Breathe Freely On-ear Pads
-Ears are not stuffy
Crystal Clear Calls
QCY H2 can pick up voice precisely, which enables ultra clear call quality even in noisy environment like subway or bus station.
Note : QCY H2 is ENC call noise reduction, not ANC noise reduction. The beneficiary of ENC noise reduction is the person on the opposite side of the call. Its function is to pick up the human voice and reduce the environmental noise of the non-target voice during the call, thereby ensuring a clear call.
Cater to Your Preference
Customize StormLite to your own preference in the app
Find your headphones
*Please refer user manual to download the app which requires android 6.0 or above/iOS 12 or above.
* Pop-up requires Android system. Please open QCY APP and turn on Bluetooth on Device before use this function.
Control at Your Fingertips
Power-on: Press and hold for 3s
Power-off: Press and hold for 5s
Pause/playback: Press MFB
Answer/end call: Press MFB
Ignore call: Press and hold for 2s
Voice assistant : Double press
Low-latency mode: Triple press MFB
Turn on/off Bass Mode: Press
VOL + -：
Volume up: Press Volume+
Volume down: Press Volume-
Skip track forward: Hold Volume+for 1.5s
Skip track backward: Hold Volume- for 1.5s
Turn off the Bluetooth on device then press and hold vol + and vol – for 10s
Headband * 1
Type-C cable * 1
User manual * 1
Product name: QCY H2
Pairing name: QCY H2
Bluetooth version: 5.3
Available system: iOS/ Android
Operation range: 10mPlayback time: approx. 60hr
Bluetooth profiles: A2DP /AVRCP/HFP
Battery capacity: 400mAh
Charging time: no more than 2hr
Charging port: Type-C
Product size: 160*80*195mm
*For best compatibility, we recommend you to connect the earbuds to phone rather than computer.
What should I do if the volume is low/the volume on one side is low?
1.First check the earphones with low volume, whether the dust filter is blocked, try to clean or remove the dust filter
2.The bluetooth data of the mobile phone or headset is abnormal, restore the headset to factory settings, clear the connection record of the mobile phone, and try to connect again
3. iPhone phone please make sure to turn off the function of “reduce high volume” on your mobile phone if the sound is low. The operation is as follows
(1) Open “Settings” on the mobile phone
(2) Select “Sound and Haptics”
(3) Select “Headphone Security”
(4) Turn off “Reduce High Volume”, and adjust the volume in decibels to 100%.
*If the user turns on this function and sets the “90 decibel” gear, the sound of the earphone will be much lower.
4.Android phones have a [Absolute Volume] setting in the “Developer Options” that needs to be turned off
5.Some Android phones have a [Volume Sync] setting in the Bluetooth settings that needs to be turned on
Note: QCY H2 cannot adjust volume through QCY APP.
Partial usage instructions for H2:
1.How to Connect
Power on headset and it will auto turn connectable. On phone, search QCY H2 and tap to connect.(lt will auto reconnect to the last device in connectivity record, if any. If you need to make it turn connectable again, please power off a nd hold MFB for 5s.)
LED blinks blue and red
middle button：Press and hold for 3s to power on
2.Multi-Point ConneCtion(Max.2 Devices)
Connect headset to Device A then turn off its Bluetooth function and the headset will auto turn connectable (LED blinks red and blue). On Device B, search QCY H2 and tap to connect Once again turnon Bluetooth function on Device A and connect it to the headset
Power off the head set a nd hold MFB for 5s or until LED blinks red and blue. Then hold both Volume+ and Volume-for 10s or until LED
blinks red 3 times. The headset will auto power off and reset to
LED blinks blue and red
Hold for 10s Hold for 5s
4.How to Charge
Connect to computer or adapter(5V 1A)
Hold for 5s
Low battery: LED blinks red every 10s Charging: LED glows solid red Top-up: LED turns off
1.Before using the headset, please read the manual carefully and keep it for future references.
2.The headset need to be fuLLy charged prior to first-time use.3.If the headset are Left unused for over two weeks,
4.Please use the chargers made by qualified manufacturer,
5.If headset fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.
1.Never disassemble or modify your headset for any reasons to avoid any damages and danger,
2.Do not store the headset in extreme temperatures (under 0°C or over 45°C),
3.Avoid using the indicator close to the eyes of children or animals,
4.Do not use the headset during a thunderstorm to avoid dysfunction and increasing risk of electricshock,
5.Do not use harsh chemicals or strong detergents to clean the headset.
Note: please do not use headset for a long time as may damage your hearing.