Bonola 3 Axis Handheld Gimbal for Smartphone/Go pro Camera Stabilizer Tripod Anti-Shake Cellphone Gimbal APP Face Tracking

Production Description:

*Working current: 80mA(Minimun value) 120mA (Standard) 300mA(Maximum value)
*Working voltage: 5V
*Working time: 6-8(according to adjusting balace and mobile phone size
* Net product amount 400g
* Tilt axis range: -165(Minimun value) +165(Maximum value)
* Rolling axis range -90(Minimun value) +90(Maximum value)
* Heading axis range:-165(Minimun value) +(Maximum value)
* Applicable models: Smartphone below4.6-6.6 inches. Gopro3/4/5

Professional high-quality 3-axis Cellphone gimbal Anti-Shake

Combined with a multi-mode handheld gimbal stabilizer, it has a high-precision anti-vibration system and a Bluetooth-compatible remote control function.

Freely switch from horizontal shooting to vertical shooting. Compatible with mobile phones from 4.7 inches to 6.5 inches

Large-capacity 2200mah lithium battery can provide up to 8 hours of battery life for stable functions.

Flexible horizontal and vertical shooting buttons

Freely switch between horizontal and vertical shooting, whether it is horizontal or vertical, you can easily shoot and meet the shooting needs of various video platforms.

Focus zoom function

When you connect to the App, the product can control the focus screen through the gimbal button, which can zoom in or zoom out on the portrait or object in the phone.

Anti-shake function

Don’t worry about holding the gimbal to affect the video or photo quality, the gimbal has an anti-shake function to ensure high-definition video or photos

multifunction button

The PTZ has many functions, you can use the functions you need through the above instructions

Sensitive intelligent face tracking

Once the face is recognized, the gimbal will swing according to the direction of the face, high-definition focus tracking

Applicable to multiple scenarios

Whether you ride a bike, climb a mountain, or dance, you can use it to help you take photos or videos

Instructions for use：

1.install smart phone:Pull the phone clip of the stabilizer away, and then lift the phone to the side of the motor.（Important notes
Do not turn on the phone without installing it！！！！）
2.Center of gravity adjustment of mobile phone：When the horizontal center of gravity tilts downward due to the excessive weight of the mobile phone, loosen the balance shaft adjustment knob, and slide the telescopic arm left and right to adjust the balance center of gravity, so that the mobile phone returns to the horizontal line, and finally ensure that the stabilizer works normally (Important notes:
Proper balance adjustment ensures better power saving during operation When the balance is not fully adjusted, the stabilizer cannot work normally increase the power consumption of the moto- For example, the motor is weak and the mode light flashes abnormally. Moreover, it will ed greatly affect the torque output of the motor)
3.Turn phone gimbal stabilizer on and off Press and hold the power button for about 3 seconds to turn on the power and the stabilizer starts to work; press and hold for about 3 seconds again to turn off the power.
Mode switch: The default full close mode Click the M key to switch to half follow mode Click the M button again to switch to full I follow mode. (Note: In the three modes, you can manually i adjust the angle of the phone; you can also push the joystick to change the orientation of the phone, and adjust it up, down, left and right.)

1.install smart phone:Pull the phone clip of the stabilizer away, and then lift the phone to the side of the motor.（Important notes
Do not turn on the phone without installing it！！！！）
2.Center of gravity adjustment of mobile phone：When the horizontal center of gravity tilts downward due to the excessive weight of the mobile phone, loosen the balance shaft adjustment knob, and slide the telescopic arm left and right to adjust the balance center of gravity, so that the mobile phone returns to the horizontal line, and finally ensure that the stabilizer works normally (Important notes:
Proper balance adjustment ensures better power saving during operation When the balance is not fully adjusted, the stabilizer cannot work normally increase the power consumption of the moto- For example, the motor is weak and the mode light flashes abnormally. Moreover, it will ed greatly affect the torque output of the motor)
3.Turn phone gimbal stabilizer on and off Press and hold the power button for about 3 seconds to turn on the power and the stabilizer starts to work; press and hold for about 3 seconds again to turn off the power.
Mode switch: The default full close mode Click the M key to switch to half follow mode Click the M button again to switch to full I follow mode. (Note: In the three modes, you can manually i adjust the angle of the phone; you can also push the joystick to change the orientation of the phone, and adjust it up, down, left and right.)